Exchange powershell windows 10
To disconnect the remote PowerShell session, run the following command. On the Start screen, open the Apps view by clicking the down arrow near the lower-left corner or swiping up from the middle of the screen. Click the Search charm, and type Exchange Management Shell. You can manually enable access to connect to Exchange Online PowerShell for the particular user with the command:. This object model enables Exchange cmdlets to apply the output from one command to subsequent commands.
Exchange powershell windows 10. Connect to Exchange servers using remote PowerShell
Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical http://replace.me/25943.txt. When you open the Exchange Management Shell you can perform administrative tasks on Exchange Server from exchange powershell windows 10 command line. You can open the Exchange Management Shell from the following locations:.
On a local computer after you install the Exchange management tools. For more information, see Install the Exchange management tools. To do the procedures in this exchangge, you need to be assigned at least one exchange powershell windows 10 role typically, via membership in a role group.
After you connect, the cmdlets and parameters that you have or don’t have access to is controlled by role-based access control RBAC. For more information, see Exchange Server permissions. If you want to run the Exchange Windoww Shell from a local installation of the Exchange management tools, you need to consider remote PowerShell access for exchange powershell windows 10 user account.
By default, users are allowed to use remote PowerShell to connect to an Exchange exvhange. However, you can block remote PowerShell access for a user account. For more information, see Control remote Exchange powershell windows 10 access to Exchange servers.
Having problems? Ask for help in the Exchange Server exchange powershell windows 10. Edge Transport servers : Run the following commands from a Command Prompt. Note that these are two жмите сюда commands on one line for ease of copying and running:. On the Start screen, open the Apps view by clicking the down arrow near the lower-left corner or swiping up from the middle of the screen.
When you find the shortcut, right-click it or press and hold it, and привожу ссылку Pin exchange powershell windows 10 Start. To pin it to the desktop taskbar, select Pin to taskbar. To use the Search charm to find and dxchange the Exchange Management Shell, use one of the methods described in the next section.
When you install Exchange on Windows Serverадрес страницы Exchange Management Shell shortcut should automatically be pinned to the Start screen. If it’s not, or if you just want to quickly find and run the Exchange Management Shell, use one of the following methods:. On the Start screen, click an empty area, and type Exchange Management Windos. When the shortcut appears in the search results, you can select it.
On the desktop or the Start screen, move your cursor to the upper-right corner, or swipe left from the right edge of the screen to show the charms. Click the Search charm, and type Exchange Management Shell. If you are using Remote Desktop Connection, you might need to use one of the following methods посетить страницу the Search exchange powershell windows 10 appears on the remote Exchange server and not on your local computer:.
The default value is Only when using the full screenbut you can change it to On the remote computer. While you’re connected to the exchangr Exchange server, use the connection bar that appears at the top of the screen to open the Exchange server’s Search charm or Start screen by clicking the down arrow and selecting Charms or Start.
Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. Страница of contents Exit focus mode. Table of contents. Tip Having problems? Submit and view feedback for This product This page. View all page feedback. In this exchange powershell windows 10.
Exchange powershell windows 10
By default, the value for Basic should already be true. If this is not the case, you can change it using this:. If this setting is not configured as described, the following error message will appear when you try to connect to Exchange Online:.
Basic authentication is currently disabled in the client configuration. Change the client configuration and try the request again. After this step, close the PowerShell console and then open it again with elevated privileges. Next, I will install the module ExchangeOnlineManagement :.
After you log on, the command will print a small table that shows which cmdlets have changed with the new module. On premises, the whole task is a bit more complex because PowerShell for Exchange is part of the management tools. These are on the Exchange installation media.
Enabling optional features required by the Exchange management tools. In addition, you have to ensure that the correct version of the. NET Framework is installed. After executing the setup, you use either the local Exchange PowerShell or the snap-in to administer Exchange. Setup adds an icon for the Exchange Management Shell to the Start menu.
From time to time, you must update both the module for Exchange Online and the management shell for a local Exchange. For Exchange Online, enter the following commands for this purpose: Subscribe to 4sysops newsletter!
Join the 4sysops PowerShell group! Your question was not answered? Ask in the PowerShell forum! Learn PowerShell with our PowerShell guides! In this Traditionally, the Office applications followed a lifecycle of five years each in mainstream and extended support. However, the situation ScriptRunner is a solution that centrally manages the running of PowerShell scripts across the environment. The new ScriptRunner Portal Learn about This cmdlet is used by the system to create the one and only rule for the Built-in protection preset security policy during the creation of the organization.
You can’t use this cmdlet if a rule for the Built-in protection preset security policy already exists. Use the New-SafeAttachmentPolicy cmdlet to create safe attachment policies in your cloud-based organization.
Use the New-SafeAttachmentRule cmdlet to create safe attachment rules in your cloud-based organization. Use the Remove-AntiPhishPolicy cmdlet to remove antiphish policies from your cloud-based organization. Use the Remove-AntiPhishRule cmdlet to remove antiphish rules from your cloud-based organization.
Use the Remove-SafeAttachmentPolicy cmdlet to remove safe attachment policies from your cloud-based organization. Use the Remove-SafeAttachmentRule cmdlet to remove safe attachment rules from your cloud-based organization. Use the Set-AntiPhishPolicy cmdlet to modify antiphish policies in your cloud-based organization. Use the Set-EmailTenantSettings cmdlet to enable or disable priority account protection in your Microsoft Defender for Office organization.
Use the Set-PhishFilterPolicy cmdlet to configure the spoof intelligence policy in your cloud-based organization. Use the Set-SafeAttachmentPolicy cmdlet to modify safe attachment policies in your cloud-based organization. Use the Set-SafeAttachmentRule cmdlet to modify safe attachment rules in your cloud-based organization.
Use the Clear-MobileDevice cmdlet to delete all data from a mobile phone. This action is often called a remote device wipe. Use the Get-ActiveSyncDevice cmdlet to retrieve the list of devices in your organization that have active Exchange ActiveSync partnerships.
The cmdlet returns the mobile device type and model information. Use the Get-ActiveSyncDeviceStatistics cmdlet to retrieve the list of mobile devices configured to synchronize with a specified user’s mailbox and return a list of statistics about the mobile devices.
Use the Get-MobileDevice cmdlet to get the list of devices in your organization that have active partnerships. Use the Get-MobileDeviceStatistics cmdlet to retrieve the list of mobile devices configured to synchronize with a specified user’s mailbox and return a list of statistics about the mobile devices.
Use the Remove-ActiveSyncDevice cmdlet to remove mobile device partnerships that identify the devices that are configured to synchronize with user mailboxes. Use the Remove-MobileDevice cmdlet to remove mobile device partnerships that identify the devices that are configured to synchronize with user mailboxes. You can set any of the parameters by using one command. Virtual list view displays address lists in your organization as pages instead of loading and viewing the entire directory.
Virtual list view allows you to display the address lists in your organization as pages instead of loading and viewing the entire directory.
Use the Get-AddressBookPolicy cmdlet to return address book policies that match the specified conditions. In Exchange Online, this cmdlet is available only in the Address Lists role, and by default, the role isn’t assigned to any role groups. To use this cmdlet, you need to add the Address Lists role to a role group for example, to the Organization Management role group.
For more information, see Add a role to a role group. Use the Get-EmailAddressPolicy cmdlet to view email address policies. In Exchange Online, email address policies are only available for Microsoft Groups. Use the Move-AddressList cmdlet to move an existing address list to a new container under the root address list. Use the New-AddressBookPolicy cmdlet to create an address book policy. Address book policies define the global address list GAL , offline address book OAB , room list, and address lists that will be displayed to mailbox users who are assigned the policy.
Use the New-EmailAddressPolicy cmdlet to create email address policies. Use the Remove-AddressBookPolicy cmdlet to delete an address book policy. You can’t remove the address book policy if it’s still assigned to a user’s mailbox.
Use the Remove-EmailAddressPolicy cmdlet to remove existing email address policies and update the affected recipients. Use the Set-DetailsTemplate cmdlet to modify the attributes of a details template.
To make changes to the details template format and layout, you need to use the Details Templates Editor in the Exchange Toolbox. Use the Set-EmailAddressPolicy cmdlet to modify email address policies. Use the Update-EmailAddressPolicy cmdlet to apply new or updated email address policies to the affected recipients in an on-premises Exchange organization. Once you enable a certificate for a service, you can’t disable it. To see the existing certificates that are used for Exchange services, use Get-ExchangeCertificate.
Use the Export-ExchangeCertificate cmdlet to export existing certificates and pending certificate requests also known as certificate signing requests or CSRs from Exchange servers. Use the Get-ExchangeCertificate cmdlet to view Exchange certificates that are installed on Exchange servers. This cmdlet returns Exchange self-signed certificates, certificates that were issued by a certification authority and pending certificate requests also known as certificate signing requests or CSRs.
Use the Import-ExchangeCertificate cmdlet to import certificates on Exchange servers. You use this cmdlet to install certificates that were exported from other servers, and to complete pending certification requests also known as certificate signing requests or CSRs from certification authorities CAs. Use the New-ExchangeCertificate cmdlet to create and renew self-signed certificates, and to create certificate requests also known as certificate signing requests or CSRs for new certificates and certificate renewals from a certification authority CA.
Use the Remove-ExchangeCertificate cmdlet to remove existing Exchange certificates or pending certificate requests also known as certificate signing requests or CSRs from Exchange servers. You can’t use this cmdlet to remove the default OME configuration.
Revoking encryption prevents the recipient from viewing the message in the OME portal. Use the Get-SpoofIntelligenceInsight cmdlet to view spoofed senders that were allowed or blocked by spoof intelligence during the last 7 days. Use the Get-SupervisoryReviewRule cmdlet to modify supervisory review rules in the Microsoft Purview compliance portal. Supervisory review lets you define policies that capture communications in your organization so they can be examined by internal or external reviewers.
Use the New-QuarantinePermissions cmdlet to create quarantine permissions objects to use with the New-QuarantineTag cmdlet. This cmdlet only works on permissions objects that were created by the New-QuarantinePermissions cmdlet and stored in a variable that’s currently available in the Windows PowerShell session. Use the Add-FederatedDomain cmdlet to configure a secondary domain with the federated organization identifier in the federation trust for the Exchange organization.
The domains being added to the federation trust must exist as accepted domains in the Exchange organization. Use the Disable-RemoteMailbox cmdlet to remove user mailboxes from the cloud-based service but keep the associated user objects in the on-premises Active Directory. Use the Enable-RemoteMailbox cmdlet to create a mailbox in the cloud-based service for an existing user in the on-premises Active Directory. Use the Get-FederatedDomainProof cmdlet to generate a cryptographically secure string for the domain used for federated sharing in your Exchange organization.
Use the Get-FederatedOrganizationIdentifier cmdlet to retrieve the Exchange organization’s federated organization identifier and related details, such as federated domains, organization contact and status. For more information, see Federation. Use the Get-FederationInformation cmdlet to get federation information, including federated domain names and target URLs, from an external Exchange organization. Use the Get-FederationTrust cmdlet to view the federation trust configured for the Exchange organization.
Use the Get-HybridConfiguration cmdlet to view the hybrid configuration for the Microsoft Exchange organization. Use the Get-IntraOrganizationConfiguration cmdlet to view the component settings of a hybrid Exchange deployment. Use the Get-OnPremisesOrganization cmdlet to retrieve settings for the OnPremisesOrganization object that has been created for a hybrid deployment. The Get-PendingFederatedDomain cmdlet is used by the Exchange admin center to display a list of pending federated domains for the federation trust for your Exchange organization.
You shouldn’t use this cmdlet to attempt to manually configure a federation trust. Use the Get-RemoteMailbox cmdlet to retrieve the mail-related attributes of users in the on-premises organization that have associated mailboxes in the cloud-based service. Use the New-FederationTrust cmdlet to set up a federation trust between your Exchange organization and the Microsoft Federation Gateway.
Use the New-HybridConfiguration cmdlet to create the HybridConfiguration object and set up a hybrid deployment between your on-premises Exchange organization and a Microsoft for enterprises organization.
Use the New-IntraOrganizationConnector cmdlet to create an Intra-Organization connector between two on-premises Exchange forests in an organization, between an Exchange on-premises organization and an Exchange Online organization, or between two Exchange Online organizations. This connector enables feature availability and service connectivity across the organizations using a common connector and connection endpoints.
Use the New-RemoteMailbox cmdlet to create a mail user in the on-premises Active Directory and also create an associated mailbox in the cloud-based service. Use the Remove-FederatedDomain cmdlet to remove a federated domain from the federated organization identifier in the federation trust for the Exchange organization. If you remove a domain configured for federated sharing, federated sharing for that domain is disabled. Use the Remove-FederationTrust cmdlet to remove an existing federation trust from an Exchange organization.
Use the Remove-RemoteMailbox cmdlet to remove a mail-enabled user in the on-premises Active Directory and the associated mailbox in the cloud-based service. Use the Set-FederatedOrganizationIdentifier cmdlet to configure the federated organization identifier for the Exchange organization. For more details, see Federation. Use the Set-HybridConfiguration cmdlet to modify the hybrid deployment between your on-premises Exchange organization and Exchange Online in a Microsoft for enterprises organization.
Use the Set-IntraOrganizationConnector cmdlet to modify an existing Intra-Organization connector between two on-premises Exchange forests in an organization, between an on-premises Exchange organization and an Exchange Online organization or between two Exchange Online organizations.
The Set-PendingFederatedDomain cmdlet is used by the Exchange admin center to configure pending domains with the federated organization identifier in the federation trust for the Exchange organization. Use the Set-RemoteMailbox cmdlet to modify remote mailboxes. A remote mailbox is a mail user in Active Directory that’s associated with a mailbox in the cloud-based service. Use the Test-FederationTrust cmdlet to verify that the federation trust is properly configured and functioning as expected.
Use the Test-FederationTrustCertificate cmdlet to check the status of certificates that are used for federation on all Exchange servers. Use the Update-HybridConfiguration cmdlet to define the credentials that are used to update the hybrid configuration object. Use the Clean-MailboxDatabase cmdlet to scan Active Directory for disconnected mailboxes that aren’t yet marked as disconnected in the Microsoft Exchange store and update the status of those mailboxes in the Exchange store.
This cmdlet isn’t able to update the Exchange store unless the Microsoft Exchange Information Store service is running and the database is mounted. The metacache database stores mailbox database indexes and secondary copies of metadata on solid state drives SSDs to improve search latency and user logons.
Use the Dismount-Database cmdlet to dismount databases. You can run this command only if the Microsoft Exchange Information Store service is running.
Use the Enable-MailboxQuarantine cmdlet to quarantine mailboxes that affect the availability of the mailbox database. Use the Get-FailedContentIndexDocuments cmdlet to retrieve a list of documents for a mailbox, mailbox database, or Mailbox server that couldn’t be indexed by Exchange Search. Use the Get-MailboxDatabase cmdlet to retrieve one or more mailbox database objects from a server or organization. Use the Get-MailboxRepairRequest cmdlet to display information about current mailbox repair requests.
Mailbox repair requests are created using the New-MailboxRepairRequest cmdlet to detect and fix mailbox corruptions. Use the Get-StoreUsageStatistics cmdlet to aid in diagnosing performance issues with your servers or databases. Use the Mount-Database cmdlet to mount mailbox databases on Exchange servers.
The cmdlet mounts the database only if the Microsoft Exchange Information Store service and the Microsoft Exchange Replication service are running. Use the Move-DatabasePath cmdlet to set a new path to the location of a database on the specified Mailbox server and to move the related files to that location. Use the New-MailboxDatabase cmdlet to create a mailbox database, or a recovery database. Each database you create must have a unique name in the organization.
Use the New-SearchDocumentFormat cmdlet to add a format-specific filter to those used by Exchange search. Use the Remove-MailboxRepairRequest cmdlet to remove mailbox repair requests from a mailbox database that were created using the New-MailboxRepairRequest cmdlet.
Use the Remove-SearchDocumentFormat cmdlet to remove a format-specific filter from those used by Exchange search. Only filters added with New-SearchDocumentFormat can be removed. Use the Remove-StoreMailbox cmdlet to purge the mailbox and all of its message content from the mailbox database. This results in permanent data loss for the mailbox being purged.
You can only run this cmdlet against disconnected or soft-deleted mailboxes. Running this command against an active mailbox fails, and you receive an error.
Use the Set-MailboxServer cmdlet to modify the mailbox configuration settings and attributes of Mailbox servers. When you disable a file format for content indexing by Exchange Search, contents of the file become unsearchable by Exchange Search clients such as Outlook on the web, Microsoft Outlook in online mode and In-Place eDiscovery.
Use the Test-AssistantHealth cmdlet to verify that the Microsoft Exchange Mailbox Assistants service MSExchangeMailboxAssistants is healthy, to recover from health issues, and to report the status of the diagnosis or recovery action. Use the Test-ExchangeSearch cmdlet to test that Exchange Search is currently enabled and is indexing new email messages in a timely manner. Use the Update-DatabaseSchema cmdlet to upgrade the database schema for one or more databases after an Exchange software update that includes database schema updates has been installed on Mailbox servers in a database availability group DAG.
Some software updates for Exchange may include database schema updates. The in-place database schema upgrade engine ensures that no schema updates occur until all members of the DAG have compatible versions of the software. Use the Update-StoreMailboxState cmdlet to synchronize the mailbox state for a mailbox in the Exchange mailbox store with the state of the corresponding Active Directory user account.
Use the Add-MailboxFolderPermission cmdlet to add folder-level permissions for users in mailboxes. Use the Add-RecipientPermission cmdlet to add SendAs permission to users in a cloud-based organization. Use the Connect-Mailbox cmdlet to connect disconnected mailboxes to existing user accounts that don’t already have mailboxes.
Use the Disable-Mailbox cmdlet to disable the mailbox of existing users who already have mailboxes. For this cmdlet, a user could also be a public folder mailbox or an InetOrgPerson object. The user account that’s associated with the mailbox remains, but it’s no longer associated with a mailbox. Use the Disable-ServiceEmailChannel cmdlet to disable the. NET service channel for a specific user.
NET service channel enables Microsoft Exchange to store information that it later forwards to applications or devices that aren’t permanently connected to the server running Exchange. Use the Enable-InboxRule cmdlet to enable an Inbox rule. Inbox rules are used to process messages in the Inbox based on conditions specified and take actions such as moving a message to a specified folder or deleting a message.
Use the Enable-Mailbox cmdlet to create mailboxes for existing users who don’t already have mailboxes. You can also use this cmdlet to create In-Place archives for existing mailboxes. Note : In Exchange Online, you use this cmdlet to add archive mailboxes for existing users and to enable auto-expanding archives. To add a mailbox for an existing Azure AD account, you need to add a license to the account as described in Assign licenses to user accounts.
Use the Enable-ServiceEmailChannel cmdlet to enable the. Use the Export-MailboxDiagnosticLogs cmdlet to export diagnostic data from user and system mailboxes in your organization. Use the Export-RecipientDataProperty cmdlet to download the picture or spoken name audio file of a mailbox or mail contact. Although this cmdlet is available in on-premises Exchange and in the cloud-based service, it only works in on-premises Exchange.
Use the Get-CalendarDiagnosticAnalysis cmdlet to troubleshoot calendar-related reliability issues. You can use this cmdlet to analyze calendar item data that’s recorded in the Calendar Diagnostic logs. You provide the calendar item data to this cmdlet by using the Get-CalendarDiagnosticLog cmdlet. In cloud-based service, use the Get-CalendarDiagnosticObjects cmdlet instead. Use the Get-CalendarDiagnosticLog cmdlet to collect a range of calendar logs.
The Calendar Diagnostic logs track all calendar items and meeting requests in mailboxes. You can use this information to troubleshoot calendar issues that occur in mailboxes. Use the Get-CalendarDiagnosticObjects cmdlet to collect a range of calendar logs. The calendar diagnostic logs track important calendar-related event data for each mailbox, and can be used to troubleshoot calendar issues that occur in mailboxes.
The logs track all calendar items and meeting messages. Use the Get-CalendarNotification cmdlet to return a list of all calendar notification settings for a user. Use the Get-CalendarProcessing cmdlet to view the calendar processing options for resource mailboxes, which include the Calendar Attendant, resource booking assistant and calendar configuration. Note that the settings returned by this cmdlet are editable only on resource mailboxes.
These settings define whether Outlook or Outlook on the web formerly known as Outlook Web App automatically discovers events from email messages and adds them to the user’s calendar. Use the Get-FocusedInbox cmdlet to view the Focused Inbox configuration for mailboxes in your organization.
Use the Get-InboxRule cmdlet to view Inbox rule properties. Use the Get-Mailbox cmdlet to view mailbox objects and attributes, populate property pages, or supply mailbox information to other tasks.
Use the Get-MailboxCalendarFolder cmdlet to retrieve the publishing or sharing settings for a specified mailbox calendar folder. Use the Get-MailboxExportRequest cmdlet to view the detailed status of an ongoing export request that was initiated by using the New-MailboxExportRequest cmdlet. This cmdlet is available only in the Mailbox Import Export role, and by default, the role isn’t assigned to any role groups.
To use this cmdlet, you need to add the Mailbox Import Export role to a role group for example, to the Organization Management role group. Use the Get-MailboxExportRequestStatistics cmdlet to view detailed information about export requests. Use the Get-MailboxFolder cmdlet to view folders in your own mailbox. Administrators can’t use this cmdlet to view folders in other mailboxes the cmdlet is available only from the MyBaseOptions user role.
Use the Get-MailboxFolderStatistics cmdlet to retrieve information about the folders in a specified mailbox, including the number and size of items in the folder, the folder name and ID, and other information. Use the Get-MailboxImportRequest cmdlet to view the detailed status of an ongoing import request that was initiated using the New-MailboxImportRequest cmdlet.
Use the Get-MailboxImportRequestStatistics cmdlet to view detailed information about import requests. Use the Get-MailboxPlan cmdlet to view information about mailbox plans in the cloud-based service. Use the Get-MailboxRestoreRequest cmdlet to view detailed status of an ongoing restore request that was initiated by using the New-MailboxRestoreRequest cmdlet. Use the Get-MailboxRestoreRequestStatistics cmdlet to view detailed information about restore requests.
Use the Get-MailboxStatistics cmdlet to return information about a mailbox, such as the size of the mailbox, the number of messages it contains, and the last time it was accessed.
In addition, you can get the move history or a move report of a completed move request. Use the Get-Place cmdlet to view the additional metadata that was configured on room mailboxes by using the Set-Place cmdlet. The additional metadata provides a better search and room suggestion experience. Use the Get-RecipientPermission cmdlet to view information about SendAs permissions that are configured for users in a cloud-based organization.
Use the Get-RecoverableItems items cmdlet to view deleted items in mailboxes. After you find the deleted items, you use the Restore-RecoverableItems cmdlet to restore them. Use the Get-ResourceConfig cmdlet to view custom room and equipment mailbox properties that you’ve configured by using the Set-ResourceConfig cmdlet.
Use the Get-SweepRule cmdlet to view Sweep rules in mailboxes. Sweep rules run at regular intervals to help keep your Inbox clean. Use the Get-UserPhoto cmdlet to view information about the user photos feature that allows users to associate a picture with their account. User photos appear in on-premises and cloud-based client applications, such as Outlook on the web, Lync, Skype for Business and SharePoint. Use the Import-RecipientDataProperty cmdlet to add a picture or a spoken name audio file to a mailbox or mail contact.
Use the New-InboxRule cmdlet to create Inbox rules in mailboxes. Inbox rules process messages in the Inbox based on conditions and take actions such as moving a message to a specified folder or deleting a message.
Use the New-MailboxExportRequest cmdlet to begin the process of exporting contents of a primary mailbox or archive to a. Use the New-MailboxFolder cmdlet to create folders in your own mailbox. Administrators can’t use this cmdlet to create folders in other mailboxes the cmdlet is available only from the MyBaseOptions user role. Use the New-MailboxImportRequest cmdlet to begin the process of importing a. Note : This cmdlet is no longer supported in Exchange Online.
To import a. Use the New-MailboxRestoreRequest cmdlet to restore a soft-deleted or disconnected mailbox. This cmdlet starts the process of moving content from the soft-deleted mailbox, disabled mailbox, or any mailbox in a recovery database into a connected primary or archive mailbox. The properties used to find disconnected mailboxes and restore a mailbox are different in Exchange Server and Exchange Online. For more information about Exchange Online, see Restore an inactive mailbox. Use the New-MailMessage cmdlet to create an email message for the specified user mailbox and place the email message in the Drafts folder of the user’s mailbox.
For more information, see Deprecation of Site Mailboxes. We recommend that you don’t use this cmdlet; instead use SharePoint to create the site mailbox. This cmdlet should only be used for diagnostic and troubleshooting purposes. Use the New-SweepRule cmdlet to create Sweep rules in mailboxes. Use the Remove-CalendarEvents cmdlet to cancel future meetings in user or resource mailboxes. Cancelling future meetings removes them from attendee and resource calendars for example, you’re going to remove the mailbox, or the user is going on a leave of absence.
Use the Remove-MailboxExportRequest cmdlet to remove fully or partially completed export requests. You can create multiple export requests for a specified mailbox provided that you specify a distinct name.
Completed export requests aren’t cleared automatically; they need to be removed by using this cmdlet. When a partially completed export request is removed, content already exported isn’t removed from the PST file.
If you want to start a new export request to the same file name and start with an empty PST file, you need to rename or delete the previous PST file. Use the Remove-MailboxFolderPermission cmdlet to remove folder-level permissions for users in mailboxes. Use the Remove-MailboxImportRequest cmdlet to remove fully or partially completed import requests. Completed import requests aren’t automatically cleared. Requests need to be removed by using the Remove-MailboxImportRequest cmdlet.
Multiple import requests can exist against the same mailbox if you provide a distinct import request name. Removing a partially completed import request removes the request from the Microsoft Exchange Mailbox Replication service MRS job queue.
Any import progress that was made until the removal won’t be reverted. Use the Remove-MailboxRestoreRequest cmdlet to remove fully or partially completed restore requests. Use the Remove-MailboxUserConfiguration cmdlet to remove user configuration items from mailboxes. Typically, after you delete a user configuration item, it’s automatically recreated the next time the user uses that feature in their mailbox.
Use the Remove-RecipientPermission cmdlet to remove SendAs permission from users in a cloud-based organization. Use the Remove-UserPhoto cmdlet to delete the photo associated with a user’s account.
The user photo feature allows users to associate a picture with their account. Use the Restore-RecoverableItems items cmdlet to restore deleted items in mailboxes. You use the Get-RecoverableItems cmdlet to find the deleted items to recover. Use the Resume-MailboxExportRequest cmdlet to resume an export request that was suspended or failed.
This cmdlet is available only in the Mailbox Import Export role and by default, the role isn’t assigned to any role groups. Use the Resume-MailboxImportRequest cmdlet to resume an import request that was suspended or failed.
Use the Resume-MailboxRestoreRequest cmdlet to resume a restore request that was suspended or failed. Use the Search-Mailbox cmdlet to search a mailbox and copy the results to a specified target mailbox, delete messages from the source mailbox, or both.
Note : In cloud-based environments, the Search-Mailbox cmdlet is being deprecated in favor of New-ComplianceSearch and related eDiscovery cmdlets. By default, Search-Mailbox is available only in the Mailbox Search or Mailbox Import Export roles, and these roles aren’t assigned to any role groups.
To use this cmdlet, you need to add one or both of the roles to a role group for example, the Organization Management role group. For more information about adding roles to role groups, see Add a role to a role group. The Set-CalendarNotification cmdlet allows users to set text message notification options for calendar events in their own calendar. By default, the MyTextMessaging end-user role gives access to this cmdlet, so admins can’t configure text messaging notification for calendar events in user calendars.
Use the Set-CalendarProcessing cmdlet to modify calendar processing options for resource mailboxes, which include the Calendar Attendant, resource booking assistant, and calendar configuration. Note that this cmdlet is effective only on resource mailboxes. Use the Set-EventsFromEmailConfiguration cmdlet to modify the events from email settings on a mailbox.
Use the Set-FocusedInbox cmdlet to enable or disable Focused Inbox for mailboxes in your organization. Use the Set-InboxRule cmdlet to modify existing Inbox rules in mailboxes. Inbox rules process messages in the Inbox based on conditions specified and take actions such as moving a message to a specified folder or deleting a message.
Use the Set-MailboxCalendarFolder cmdlet to configure calendar publishing or sharing settings on a mailbox for the visibility of calendar information to external users. To add or modify the permissions so internal users can access the calendar, use the Add-MailboxFolderPermission or Set-MailboxFolderPermission cmdlets.
Use the Set-MailboxExportRequest cmdlet to change export request options after the request has been created. You can use the Set-MailboxExportRequest cmdlet to recover from failed export requests. Use the Set-MailboxFolderPermission cmdlet to modify folder-level permissions for users in mailboxes. This cmdlet differs from the Add-MailboxFolderPermission cmdlet in that it modifies existing permission entries. To configure calendar publishing or sharing settings for a mailbox so calendar information is visible to external users, use the Set-MailboxCalendarFolder cmdlet.
Use the Set-MailboxImportRequest cmdlet to change import request options after the request has been created. You can use the Set-MailboxImportRequest cmdlet to recover from failed import requests. Use the Set-MailboxPlan cmdlet to modify the settings of mailbox plans in the cloud-based service.
Use the Set-MailboxRestoreRequest cmdlet to change restore request options after the request has been created. You can use this cmdlet to recover from failed restore requests. Use the Set-Place cmdlet to update room mailboxes with additional metadata, which provides a better search and room suggestion experience. To modify these properties except GeoCoordinates on synchronized room mailboxes, use the Set-User or Set-Mailbox cmdlets in on-premises Exchange.
Use the Set-ResourceConfig cmdlet to create custom resource properties that you can add to room and equipment mailboxes. Use the Set-UserPhoto cmdlet to configure the user photos feature that allows users to associate a picture with their account.
User photos appear in on-premises and cloud-based client applications, such as Outlook on the web, Lync, Skype for Business, and SharePoint. Use the Suspend-MailboxExportRequest cmdlet to suspend an export request any time after the request was created, but before the request reaches the status of Completed.
You can resume the request by using the Resume-MailboxExportRequest cmdlet. Use the Suspend-MailboxImportRequest cmdlet to suspend an import request any time after the request was created, but before the request reaches the status of Completed.
You can resume the move request by using the Resume-MailboxImportRequest cmdlet. Use the Suspend-MailboxRestoreRequest cmdlet to suspend a restore request any time after the request was created, but before the request reaches the status of Completed. You can resume the restore request by using the Resume-MailboxRestoreRequest cmdlet. Use the Test-MapiConnectivity cmdlet to verify server functionality by logging on to the mailbox that you specify.
If you don’t specify a mailbox, the cmdlet logs on to the SystemMailbox on the database that you specify. Use the Undo-SoftDeletedMailbox cmdlet to recover a mailbox that has been deleted. Mailboxes can be recovered within 30 days of being deleted. Use the Add-ResubmitRequest cmdlet to add requests to replay redundant copies of messages from Safety Net after a mailbox database recovery. Use the Export-Message cmdlet to copy a message from a queue on a Mailbox server or an Edge Transport server to a specified file path in your organization.
Use the Get-AcceptedDomain cmdlet to view the configuration information for the accepted domains in your organization. Use the Get-AddressRewriteEntry cmdlet to view an existing address rewrite entry that rewrites sender and recipient email addresses in messages sent to or sent from your organization through an Edge Transport server. Use the Get-DeliveryAgentConnector cmdlet to retrieve information about a specific delivery agent connector in your organization.
Use the Get-EdgeSubscription cmdlet to retrieve information about Edge Subscriptions in your organization. Use the Get-EdgeSyncServiceConfig cmdlet to retrieve the edge synchronization services settings that control the general synchronization behavior shared by all Microsoft Exchange EdgeSync services.
Use the Get-ForeignConnector cmdlet to view the configuration information for a Foreign connector in the Transport service of a Mailbox server. Use the Get-InboundConnector cmdlet to view the settings for an Inbound connector in your cloud-based organization. For more information about connecting to Exchange servers without the Exchange management tools installed, see Connect to Exchange servers using remote PowerShell.
You typically deploy Edge Transport servers in your perimeter network, either as stand-alone servers or as members of a perimeter Active Directory domain. Edge Transport servers don’t use management roles or management role groups to control permissions. The local Administrators group controls who can configure the Exchange features on the local server. The following table provides links to articles that can help you learn about and use the Exchange Management Shell.
Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. Table of contents Exit focus mode. Table of contents. Instead, to use PowerShell in Exchange Server, you have the following options: Use the Exchange Management Shell on an Exchange server or that you’ve installed locally on your own computer using a Management tools only installation of Exchange server.
For more information, see Connect to Exchange servers using remote PowerShell. Submit and view feedback for This product This page. View all page feedback.